{"product_id":"sp-racing-f3-neo-fc-pdb","title":"SP Racing F3 NEO FC\/PDB","description":"\u003cp\u003e\u003cspan\u003eThe Seriously Pro Racing F3 NEO board (SPRacingF3NEO) is a full-featured board designed specifically for quadcopters.  The NEO FC\/PDB features the latest gyro technology and stacks with an OSD\/VTX board.  The NEO stack makes for an extremely compact and easy to install solution with the minimal of solder connections and external cables required.  It's perfect for beginners and experienced pilots.  The acc\/gyro is an ICM20602, which is newer than you'll find in all other F3 boards and most F4 boards as of December 2016.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNext-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.\u003c\/li\u003e\r\n\u003cli\u003eFeatures the latest accelerometer and gyro technology (ICM20602) via SPI connection.\u003c\/li\u003e\r\n\u003cli\u003eMicroSD-Card socket for black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.\u003c\/li\u003e\r\n\u003cli\u003eBuilt in amperage\/current monitoring sensor, 110A.\u003c\/li\u003e\r\n\u003cli\u003eTelemetry support (FrSky, SmartPort\/S.PORT, IBus, etc).\u003c\/li\u003e\r\n\u003cli\u003e5 Serial ports. e.g Receiver + Telemetry + 3 Spare - None shared with the USB.\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in LC-Filter for clearer video.\u003c\/li\u003e\r\n\u003cli\u003eRace transponder built in - just turn up at a race and have your lap times recorded.\u003c\/li\u003e\r\n\u003cli\u003eBoot button for easy DFU\/USB flashing.\u003c\/li\u003e\r\n\u003cli\u003eWire up using solder pads for ESC connections and cable or header pins for receiver.\u003c\/li\u003e\r\n\u003cli\u003e6 PWM output lines for ESCs and Servos. 4 are arranged for easy wiring on each corner of the board. (The 4 main outputs support DSHOT *).\u003c\/li\u003e\r\n\u003cli\u003eSupports direct connection of SBus, SumH, SumD, Spektrum1024\/2048, XBus\/IBus receivers. No external inverters required (built-in).\u003c\/li\u003e\r\n\u003cli\u003eSupports direct connection of 3.3v Spektrum Satellite receivers via 3 pin through-hole JST-ZH connector.\u003c\/li\u003e\r\n\u003cli\u003eSupports PPM receivers.\u003c\/li\u003e\r\n\u003cli\u003eMicro USB socket. \u003c\/li\u003e\r\n\u003cli\u003eDedicated output for programmable LEDs - great for orientation, racing and night flying.\u003c\/li\u003e\r\n\u003cli\u003eDedicated I2C\/UART3\/UART5 port for connection of OLED display, GPS receivers, external MAG\/BARO without needing flight battery.\u003c\/li\u003e\r\n\u003cli\u003eVoltage monitoring for battery, 12v and 5v supplies.\u003c\/li\u003e\r\n\u003cli\u003eAnalog RSSI monitoring.\u003c\/li\u003e\r\n\u003cli\u003eBuzzer port for audible warnings and notifications.\u003c\/li\u003e\r\n\u003cli\u003eDeveloper friendly debugging port (SWD) unbrickable bootloader.\u003c\/li\u003e\r\n\u003cli\u003eSymmetrical design for a super tidy wiring, just 4 wires per corner to each ESC and you're done!\u003c\/li\u003e\r\n\u003cli\u003eJST-SH sockets only for I2C\/UART3\/UART4 and SWD. UART1 available on through-hole stacking pins and broken out on OSD\/VTX board.\u003c\/li\u003e\r\n\u003cli\u003e12 position connector for stacking the OSD\/VTX board. (SPI\/CS1\/CS2\/VSYNC\/HSYNC\/VTX ENABLE\/BUTTON),\u003c\/li\u003e\r\n\u003cli\u003eThrough-hole solder pads AND solder-less connections for receiver via PicoBlade connector.\u003c\/li\u003e\r\n\u003cli\u003eThrough-hole solder pads for Transponder IR LED.\u003c\/li\u003e\r\n\u003cli\u003eSolder pads for RSSI.\u003c\/li\u003e\r\n\u003cli\u003eSolder pads for LED Strip.\u003c\/li\u003e\r\n\u003cli\u003eSolder pads for ESC power. (2 by each corner)\u003c\/li\u003e\r\n\u003cli\u003eSolder pads for ESC signal and ground. (2 by each corner).\u003c\/li\u003e\r\n\u003cli\u003eSolder pads for 2x additional PWM outputs (e.g. for pan \/ tilt servos).\u003c\/li\u003e\r\n\u003cli\u003eDirect connection for XT60 socket. (Through hole).\u003c\/li\u003e\r\n\u003cli\u003eFlashing via USB or serial port.\u003c\/li\u003e\r\n\u003cli\u003eStandard 30.5mm mounting holes, board fits in most 36x36x mounting spaces.\u003c\/li\u003e\r\n\u003cli\u003eBoard is 45x50mm with corner cutouts to allow frame clearance.\u003c\/li\u003e\r\n\u003cli\u003eLEDs for 3v (Blue), 5v (Green) and 12v (Yellow) supplies.\u003c\/li\u003e\r\n\u003cli\u003eTwo status LEDs (Red, White) for easy diagnostics\/flight mode indications.\u003c\/li\u003e\r\n\u003cli\u003eSupplied with cable for no-solder connection to FrSky XSR receivers.\u003c\/li\u003e\r\n\u003cli\u003eSupplied with receiver cable for no-solder connection to most other receviers.\u003c\/li\u003e\r\n\u003cli\u003eSupplied with JST-ZH socket for connection to 3.3v spektrum satellite receivers.\u003c\/li\u003e\r\n\u003cli\u003eCleanflight logo.\u003c\/li\u003e\r\n\u003cli\u003eSPRacing logo.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: x-small;\"\u003e\u003cem\u003e\u003cstrong\u003e* NOTE\u003c\/strong\u003e: DSHOT support is coming to a future Cleanflight release.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch2\u003eIncludes\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNEO FC\/PDB board.\u003c\/li\u003e\r\n\u003cli\u003eNEO to FrSky XSR cable.\u003c\/li\u003e\r\n\u003cli\u003eNEO to other receiver cable (dupont\/servo style connectors)\u003c\/li\u003e\r\n\u003cli\u003e6 straight-though header pins.\u003c\/li\u003e\r\n\u003cli\u003e6 right-angle header pins.\u003c\/li\u003e\r\n\u003cli\u003eJST-ZH socket for Spektrum Satellite receivers.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: x-small;\"\u003e\u003cem\u003e\u003cstrong\u003e* NOTE\u003c\/strong\u003e: stacking VTX\/OSD board available separately.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Seriously Pro","offers":[{"title":"Default Title","offer_id":14778954154047,"sku":"6874","price":20.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/sp-racing-f3-neo-fc-pdb.jpg?v=1570043995","url":"https:\/\/dronecosmo.myshopify.com\/products\/sp-racing-f3-neo-fc-pdb","provider":"DroneCosmo","version":"1.0","type":"link"}