{"product_id":"qav250-fury-power-distribution-board","title":"QAV250 \"Fury\" Power Distribution Board","description":"\u003cp\u003eLooking for a QAV250 Power Distribution Board (PDB) to get an integrated FPV setup and simple R\/C wiring? This board, nicknamed \"FURY\", provides upgraded power distribution with current sensing, filtered power to the A\/V equipment and option to install a TBS CORE module, while also adding rigidity to the airframe.\u003c\/p\u003e\r\n\u003cp\u003eThe ESCs are soldered to the the board (all wires), making the board layout very tidy and modular. It is designed with the OpenPilot flight controller in mind, requiring only two cables to install the flight system and another two cables (included) to finish the FPV system.\u003c\/p\u003e\r\n\u003cp\u003eIn front of the board is a spot to install an optional TBS CORE module. This provides separation between the FPV system and R\/C flight system - which is known to produce noise and cause video interference. It also provides a simple and very handy OSD (On-Screen Display) to read battery consumption, voltage and receiver signal strength. The board can also be set up to work stand-alone (without CORE).\u003c\/p\u003e\r\n\u003cp\u003eThe camera and video transmitter plugs easily into the sockets with the provided cables, there are also solder pads to connect wires directly. Several auxiliary power ports make it easy to hook-up alarms, beepers, video transmitters, etc.\u003c\/p\u003e\r\n\u003cp\u003eIt is made of the same high strength fiberglass-reinforced epoxy laminate as the stock PDB. All the components are protected inside the \"cavity\" on the QAV250 platform. Two additional mounting holes in the front gives extra rigidity.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003eDesigned and developed by ivc.no\u003c\/em\u003e\u003c\/p\u003e\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cp\u003e\u003ca href=\"http:\/\/cdn.getfpv.com\/media\/wysiwyg\/product-detail-images\/qav250_setup_annotation.png\" target=\"_blank\"\u003e\u003cimg src=\"http:\/\/cdn.getfpv.com\/media\/wysiwyg\/product-detail-images\/qav250_setup_annotation.png\" alt=\"QAV250 Fury Power Distribution Board\" width=\"633\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBuilt to reduce clutter and make setup easy\u003c\/li\u003e\r\n\u003cli\u003eDirect replacement of original QAV250 PDB\u003c\/li\u003e\r\n\u003cli\u003eSpeed controllers connect directly to the board - power and control!\u003c\/li\u003e\r\n\u003cli\u003eOnly two wire harnesses needed when using OpenPilot and two for FPV equipment\u003c\/li\u003e\r\n\u003cli\u003ePower configuration jumpers to setup on-board power routing\u003c\/li\u003e\r\n\u003cli\u003eAdditional capacitors to stabilize ESC sync.\u003c\/li\u003e\r\n\u003cli\u003eOptional TBS CORE module for separate voltage regulation and OSD read-outs\u003c\/li\u003e\r\n\u003cli\u003eOn-board 50A current sensor\u003c\/li\u003e\r\n\u003cli\u003eBEC power filtered and load-balanced - connect multiple BECs in parallel\u003c\/li\u003e\r\n\u003cli\u003eFiltered video transmitter and camera power, in addition to CORE filtering\u003c\/li\u003e\r\n\u003cli\u003eLED indicators shows status of BEC and battery power\u003c\/li\u003e\r\n\u003cli\u003eMultiple auxiliary pads for for VTx, camera, beepers, alarms, etc.\u003c\/li\u003e\r\n\u003cli\u003eProvides good RF shielding for noise isolation\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e\r\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRevision: Rev. 2 May 2014\u003c\/li\u003e\r\n\u003cli\u003ePlatform: Lumenier QAV250 quadcopter\u003c\/li\u003e\r\n\u003cli\u003eSpeed controllers: 10-18A, approx. L29 mm x W18 mm x H7 mm\u003c\/li\u003e\r\n\u003cli\u003ePower outputs: filtered BEC power, filtered battery power, filtered TBS CORE power\u003c\/li\u003e\r\n\u003cli\u003eCurrent sensor: 50A\u003c\/li\u003e\r\n\u003cli\u003eOSD features: current consumption, battery voltage, up-counting timer, RSSI (received signal strength indicator) - TBS CORE required!\u003c\/li\u003e\r\n\u003cli\u003eShielding: ground pour shielding, TBS CORE RF shield\u003c\/li\u003e\r\n\u003cli\u003eConnectors: JST-SH 1.25mm sockets, 2.54mm solder pads, 2mm solder pads\u003c\/li\u003e\r\n\u003cli\u003eStatus indicators: green BEC OK, blue battery OK\u003c\/li\u003e\r\n\u003cli\u003eMaterial: Fiberglass laminate board, 1.6mm, white finish\u003c\/li\u003e\r\n\u003cli\u003eDimension: 149 x 49 x 15 mm\u003c\/li\u003e\r\n\u003cli\u003eWeight: 21 grams\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003ch2\u003eIncludes\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1x QAV250 \"FURY\" PDB Board\u003c\/li\u003e\r\n\u003cli\u003e1x OpenPilot Power Cable\u003c\/li\u003e\r\n\u003cli\u003e1x Sony Board Camera Cable\u003c\/li\u003e\r\n\u003cli\u003e1x ImmersionRC VTX Cable\u003c\/li\u003e\r\n\u003cli\u003e2x Pin Headers 2.54mm for VTX\/CAM\u003c\/li\u003e\r\n\u003cli\u003e1x Pin Header 2mm for TBS CORE\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eOptional Extras\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/www.getfpv.com\/team-blacksheep-core.html\"\u003eTBS CORE\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/www.getfpv.com\/tbs-rf-tin-shield.html\"\u003eTBS CORE RF Shield\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eDownloads\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.getfpv.com\/media\/wysiwyg\/documentation\/qav250_fury_board_manual.compressed.pdf\" target=\"_blank\"\u003eDownload the QAV250 \"Fury\" Power Distribution Board Manual here.\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":14939214446655,"sku":"2111-dc","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/qav250-fury-pdb-board_1.jpg?v=1571710428","url":"https:\/\/dronecosmo.myshopify.com\/products\/qav250-fury-power-distribution-board","provider":"DroneCosmo","version":"1.0","type":"link"}