{"product_id":"lumenier-mini-blheli-s-10a-4-in-1-opto-esc","title":"Lumenier Mini BLHeli_S 10A 4-in-1 OPTO ESC DSHOT","description":"\u003cp\u003eThe Lumenier 10A 4 in 1 BLHeli_S ESC features the powerful BusyBee2 (EFM8BB21F16) chip that runs at at 48MHz 2x the speed of prevoius BLHeli_S ESCs. This BB2 processor allows the ESC to perform with incredible precision (up to 500kv eRPM support), resulting in smooth and responsive power and taking full advantage of the BLHeli_S firmware. This 4 in 1 ESC is low profile and compact in size, saving weight and making builds easy. These ESCs are OPTO (no BEC) and come with motor, signal and power wires for your convenience. The set also includes 9x pieces of M3x8 standoff with 6mm post, 5x 8mm plastic screws, and 5x 6mm threaded standoffs. The ESC features new BLHeli_S firmware pre-installed on them. They are compatible with PWM, Oneshot125, Oneshot42, and Multishot protocols. Simply enable the feature in the flight controller software and the ESC will automatically match it. This ESC also supports DSHOT protocol by flashing DSHOT firmware.\u003c\/p\u003e\r\n\u003cp\u003eThese BLHeli_S ESCs feature hardware PWM controllers running at 36KHz, which is more than double of previous software PWM ESCs at 16KHz. This results in ultra smooth throttle response and near silent motor operation.\u003c\/p\u003e\r\n\u003cp\u003eThis tiny 4-in-1 ESC is perfect for mini 2\" and 3\" brushless builds.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eSmall size:\u003c\/strong\u003e 20x20mm mounting holes\u003c\/li\u003e\r\n\u003cli\u003eNew BusyBee2 MCU at 48MHz, up to 500k eRPM support\u003c\/li\u003e\r\n\u003cli\u003eImproved firmware using BLHeli_S\u003c\/li\u003e\r\n\u003cli\u003eHardware PWM driver at 36KHz\u003c\/li\u003e\r\n\u003cli\u003eSupports Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). Auto-detection. DSHOT compatible\u003c\/li\u003e\r\n\u003cli\u003eUltra Lightweight, and compact size\u003c\/li\u003e\r\n\u003cli\u003eAdaptive timing, compatible with a wide range of motors and Kv\u003c\/li\u003e\r\n\u003cli\u003eSychronous rectification technology adds efficiency, damped light\u003c\/li\u003e\r\n\u003cli\u003ePowerful regenerative braking \/ active braking.\u003c\/li\u003e\r\n\u003cli\u003e2-3s LiPo battery compatible\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 2-3s Lipo\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eConstant:\u003c\/strong\u003e 10 Amps\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eBurst:\u003c\/strong\u003e 15 Amps\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20g w\/ wires\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 27x27x2mm (6mm tall including connectors) (31mm wide with motor tabs)\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMounting Dimensions: \u003c\/strong\u003e20x20mm\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMotor wire:\u003c\/strong\u003e 70mm\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eSignal wire:\u003c\/strong\u003e 140mm\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e BusyBee2 MCU at 48MHz\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003ePCB\u003c\/strong\u003e - 4 Layer Blind Pole PCB - 3oz Pour\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMosfet\u003c\/strong\u003e: N-Channel\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eBEC:\u003c\/strong\u003e OPTO (none)\u003c\/li\u003e\r\n\u003cli\u003eSupports Damped mode, Oneshot125 and Multishot. DSHOT via firmware flash.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cem\u003eWith all ESC's that have active braking we recommend you isolate or filter all sensitive electronics to prevent feedback \/ spikes.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003ch2\u003eIncludes\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1x Lumenier BLHeli_S 10A 4-in-1 ESC\u003c\/li\u003e\r\n\u003cli\u003e1x Signal wire connector with servo connections (100mm)\u003c\/li\u003e\r\n\u003cli\u003e1x 6p mini signal wire (35mm)\u003c\/li\u003e\r\n\u003cli\u003e12x 22AWG motor wires (140mm)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":30087489749055,"sku":"6705","price":36.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/lumenier-blheli-s-10a-4in1_4ec81d1f-c85e-4029-b689-e898541905e9.jpg?v=1570092753","url":"https:\/\/dronecosmo.myshopify.com\/products\/lumenier-mini-blheli-s-10a-4-in-1-opto-esc","provider":"DroneCosmo","version":"1.0","type":"link"}