{"product_id":"lumenier-micro-lux-v3-f4-30a-blheli-32-4in1-stack-fc-esc-combo","title":"Lumenier MICRO LUX V3 F4 + 30A BLHeli_32 4in1 Stack (FC + ESC Combo)","description":"\u003cp\u003e\u003cimg alt=\"Lumenier MICRO LUX F4 Flight Controller\" src=\"http:\/\/cdn.getfpv.com\/media\/wysiwyg\/lumenier\/lumenier-micro-lux.png\" style=\"float: right; padding-left: 15px; padding-bottom: 10px;\"\u003eThe Lumenier MICRO LUX V3 F4 + 30A BLHeli_32 4in1 Stack brings incredible power and performance in a micro sized 20x20 package, with plug and play simplicity. No messy harnesses needed to join the 32bit 30A 4in1 ESC and the F4 OSD Flight Controller. Simply press the two units together lining up the micro pin headers. The 4 motor signals and power\/ground are passed directly to the FC. All this in a micro size and weiging only 12g for an FC and 4in1 ESC!\u003c\/p\u003e\r\n\u003cp\u003eNow you can get all the performance from an F4 based flight controller in a micro size! The Micro LUX V3 includes an on-board Betaflight OSD, and a 4s battery power can connect directly to the unit, it has 16MB on-board flash memory for blackbox recording and more.. Using an On Screen Display has never been simpler, just drag and drop in the Betaflight Configurator.\u003c\/p\u003e\r\n\u003cp\u003eThe powerful 30A 32 bit BLHeli_32 ESC packs all the features of a full size 4in1 ESC into a micro 20x20 sized board. It is compatible with direct power from 4s batteries, making it compatible with most racing drones right out of the box. Now you can build a 5\" racing quad with a micro power stack to save weight and size!\u003c\/p\u003e\r\n\u003cp\u003eThe MICRO LUX V3 comes with BetaFlight pre-installed. The MICRO LUX supports both SBUS and PPM inputs as well as DSM\/DSMX receivers with both 5v and 3.3v support.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: The target for the LUX has the gyro mounted 90 degrees offset on the yaw axis. To correct this simply connect the FC to BetaFlight, and on the Configuration tab under \"Board and Sensor Alignment\" set the \"Yaw Degrees\" to \"90\" and save. Test the board's movement in the configurator again to confirm correct orientation.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cimg alt=\"LUX Gyro Alignment\" src=\"http:\/\/cdn.getfpv.com\/media\/wysiwyg\/product-user-manuals\/lux-board-sensor-alignment-90_1.PNG\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003ch1\u003eSoftware\/Hardware Features\u003c\/h1\u003e\r\n\u003ch2\u003eLumenier Micro LUX V3 F4 Flight Controller\u003c\/h2\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2-4S Direct Lipo input support (5-16v)\u003c\/li\u003e\r\n\u003cli\u003eOn-board BetaFlight OSD\u003c\/li\u003e\r\n\u003cli\u003eOn-board 5v\/2A and 3.3v\/0.2A regulators\u003c\/li\u003e\r\n\u003cli\u003eSBUS and PPM support\u003c\/li\u003e\r\n\u003cli\u003eRGB LED dedicated pad and Buzzer Pad\u003c\/li\u003e\r\n\u003cli\u003eVBAT Monitoring support\u003c\/li\u003e\r\n\u003cli\u003e3x UART Ports\u003c\/li\u003e\r\n\u003cli\u003eBetaflight support (Supports new DSHOT protocol)\u003c\/li\u003e\r\n\u003cli\u003eBLHeli pass-through flashing supported by hardware\u003c\/li\u003e\r\n\u003cli\u003eBlack box (flash memory to 16MB)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSTM32F405 (2MB flash) 32-bit processor\u003c\/li\u003e\r\n\u003cli\u003eMPU6000 Gyro\/Accelerometer\u003c\/li\u003e\r\n\u003cli\u003eHigh quality 1.6mm PCB\u003c\/li\u003e\r\n\u003cli\u003eMicro USB connector for programming\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 27x27x6mm (includes USB in height)\u003c\/li\u003e\r\n\u003cli\u003eMounting Holes: 20mm square to center of holes\u003c\/li\u003e\r\n\u003cli\u003eWeight: 4g\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eLumenier BLHeli_32 30A 4S 4IN1 ESC\u003c\/h2\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNew 32bit Cortex-M0 running at 48MHz\u003c\/li\u003e\r\n\u003cli\u003eLatest Gen. firmware using BLHeli_32\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003e2-4s\u003c\/strong\u003e LiPo battery compatible\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003e30A per channel, 40A burst\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eSupports DSHOT 1200, Proshot, Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). Auto-detection.\u003c\/li\u003e\r\n\u003cli\u003eLightweight, and compact size\u003c\/li\u003e\r\n\u003cli\u003eAdaptive timing, compatible with a wide range of motors and Kv\u003c\/li\u003e\r\n\u003cli\u003eSynchronous rectification technology adds efficiency, damped light\u003c\/li\u003e\r\n\u003cli\u003ePowerful regenerative braking \/ active braking.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eInput: 2-4s LiPoly\u003c\/li\u003e\r\n\u003cli\u003eConstant: 30 Amps (per channel)\u003c\/li\u003e\r\n\u003cli\u003eBurst: 35Amps (per channel)\u003c\/li\u003e\r\n\u003cli\u003eBEC: No\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 33x36mm(including the power pads)\u003c\/li\u003e\r\n\u003cli\u003eMounting Holes: 20mm square to center of holes\u003c\/li\u003e\r\n\u003cli\u003eWeight: 8g (without motor wires)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eUser Manual\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/www.getfpv.com\/media\/wysiwyg\/product-user-manuals\/MICRO-LUX-V3-Diagram.pdf\" target=\"_blank\"\u003eDownload the Micro LUX V3 Stack User Manual here.\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eThe MICRO LUX V3 uses the LUXF4OSD target. \u003ca href=\"https:\/\/github.com\/betaflight\/betaflight-configurator\/releases\" target=\"_blank\"\u003eDownload Betaflight Configurator here.\u003c\/a\u003e\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eIncludes\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1x Lumenier MICRO LUX V3 F4 + 30A BLHeli_32 4in1 Stack\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLumeneir LUX F4 + OSD Flight Controller (Designed for BetaFlight)\u003c\/li\u003e\r\n\u003cli\u003eLumenier 30A BLHeli_32 4in1 ESC (2-4s)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003e1x Set of plastic mounting hardware\u003c\/li\u003e\r\n\u003cli\u003e4x M3x20 screws, 4x 5mm spacer, 4x 3mm spacer, 4x nuts\u003c\/li\u003e\r\n\u003cli\u003e1x 330uF 25v Low ESR Capacitor\u003c\/li\u003e\r\n\u003cli\u003e1x Set 16awg silicone power wire (90mm)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003c\/p\u003e","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":15481510756415,"sku":"8924","price":67.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/lux-main_1.jpg?v=1571710479","url":"https:\/\/dronecosmo.myshopify.com\/products\/lumenier-micro-lux-v3-f4-30a-blheli-32-4in1-stack-fc-esc-combo","provider":"DroneCosmo","version":"1.0","type":"link"}