{"product_id":"lumenier-12a-esc-w-simonk-autoshot-2-4s-n-fet","title":"Lumenier 12 amp ESC w\/ SimonK AutoShot (2-4s N-FET)","description":"\u003cp\u003eThe Lumenier 12 amp ESC with customized SimonK firmware including OneShot auto-detect and Active Braking\/Damped Light\/Comp_PWM is the perfect ESC to use on mini FPV quads such as the QAV250. This ESC comes pre-loaded with the newest firmware compatible with new features like \"OneShot\" (no soldering required, it will auto-detect if OneShot is enabled), Complimentary PWM (similar to KISS braking feature), compatible with all Lumenier motors up to 4 cell. \u003cbr\u003e\u003cbr\u003e The Lumenier 12 amp AutoShot ESC have been tested and are compatible with all Lumenier motors (FX1806, FX2206, FXC2206), 2S-4S, both 5\" and 6\" props without sync loss issues or cogging. \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eThe Simonk AutoShot firmware is pre-calibrated with endpoints 1060us - 1860us. This corresponds to the default endpoints in both Baseflight and Cleanflight. Therefore, \"Calibration\" procedure is not necessary. \u003cstrong\u003eRemoval of the red wire in the signal cable is ok if you don't need 5v power out, but both the ground (black) and signal wire (white) need to be connect to the flight controller. Do not connect only the signal wire alone. \u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eActive Braking \/ Damped Light \/ Comp_PWM\u003c\/li\u003e\r\n\u003cli\u003eAutoShot (OneShot125 \/ FastPWM Auto Detect)\u003c\/li\u003e\r\n\u003cli\u003eCustomized to drive all motors without sync issues or cogging.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eTo enable new features on Baseflight:\u003cbr\u003e - On Configuration tab, check \"Enable OneShot\" and \"Enable FastPWM\"\u003cbr\u003e - Scroll down and click \"Save\" \u003cbr\u003e\u003cbr\u003e To enable new features on Cleanflight:\u003cbr\u003e -On Configuration tab, check the \"Enabled\" box next to \"ONESHOT125\" Feature\u003cbr\u003e -Scroll down and click \"Save\" \u003cbr\u003e \u003c\/p\u003e\r\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMax continuous load: ~12 amps\u003c\/li\u003e\r\n\u003cli\u003eBurst Current: 22A\/10sec\u003c\/li\u003e\r\n\u003cli\u003eBEC: 5v\/1amp max\u003c\/li\u003e\r\n\u003cli\u003eLipo Cells: 2 to 4 cells\u003c\/li\u003e\r\n\u003cli\u003eCables are fitted with female 2mm bullet connectors\u003c\/li\u003e\r\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\r\n\u003cli\u003eN-FET only with BEC flashed with SimonK firmware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eDimensions\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e31mm L x 18mm W x 7mm H (35mm in length including capacitor)\u003c\/li\u003e\r\n\u003cli\u003e15cm signal wire \/ 5v power\u003c\/li\u003e\r\n\u003cli\u003e5cm motor wires (including 2mm bullet connector)\u003c\/li\u003e\r\n\u003cli\u003e70cm ESC power wires\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e\n\u003cem\u003eMore info\u003c\/em\u003e: An ESC has either P-channel and N-channel FETs mixed or N-channel FETs only. The ESCs which use only N-channel FETs have the advantage of lower resistance, less losses and hence more efficiency. Learn more about N-channel and P-channel directly from Simon Kirby \u003ca href=\"https:\/\/github.com\/sim-\/tgy\/wiki\/Identifying-ESC-pin-configuration\"\u003ehere\u003c\/a\u003e.\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cem\u003eRoyalties paid on each unit sold to SimonK\u003c\/em\u003e\u003c\/div\u003e","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":30087397605439,"sku":"2739","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/autoshot_close_2_0dea256b-3540-4949-b09d-450ebb54a738.jpg?v=1570092751","url":"https:\/\/dronecosmo.myshopify.com\/products\/lumenier-12a-esc-w-simonk-autoshot-2-4s-n-fet","provider":"DroneCosmo","version":"1.0","type":"link"}