{"product_id":"holybro-kakute-v2-atlatl-hv-v2-tekko32-35a-4-in-1-esc-combo","title":"Holybro Kakute V2 - Atlatl HV V2 - Tekko32 35A 4-in-1 ESC Combo","description":"\u003cp\u003eHolybro is saving you time and guesswork into making your perfect FPV stack. Comes with the Kakute V2 FC, Atlatl HV vtx, and the Tekko32 4-in-1 ESC. \u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003eTekko32 35A 4-in-1 ESC\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4-in-1 ESC with 30.5x30.5mm mounting holes, supports DSHOT 1200, BLHELI32 firmware\u003c\/li\u003e\r\n\u003cli\u003eAdded more CAPS to reduce power noise\u003c\/li\u003e\r\n\u003cli\u003e32bit ESC with BLHELI32 firmware\u003c\/li\u003e\r\n\u003cli\u003e4PWM input\u003c\/li\u003e\r\n\u003cli\u003eVoltage output (VBAT), ESC Telemetry(TELEM)\u003c\/li\u003e\r\n\u003cli\u003eSupports Oneshot \/ Multishot \/ Dshot PWM\u003c\/li\u003e\r\n\u003cli\u003eSupports damped light\u003c\/li\u003e\r\n\u003cli\u003eNO BEC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSupports 3-6S lipo input\u003c\/li\u003e\r\n\u003cli\u003e35A continuous current, 50A burst\u003c\/li\u003e\r\n\u003cli\u003eMounting holes 30.5x30.5mm\u003c\/li\u003e\r\n\u003cli\u003eSize: 55*40*6.4mm\u003c\/li\u003e\r\n\u003cli\u003eWeight: 17g\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cstrong\u003eKakute F4 V2\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003ch3\u003eNew V2 Features\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTwo extra UART Ports\u003c\/li\u003e\r\n\u003cli\u003eUART4 port for serial camera like the runcam split. (This is not the same as Betaflight Camera Control, which runs of the OSD menu for cameras like the swift, monster).\u003c\/li\u003e\r\n\u003cli\u003eUART5 port for ESC telemetry support (for BLheli32 and KISS)\u003c\/li\u003e\r\n\u003cli\u003eThrough-hole solder pads instead of flat pads for more secure soldering especially for beginners.\u003c\/li\u003e\r\n\u003cli\u003eBarometer sensor on board allows altitude hold mode.\u003c\/li\u003e\r\n\u003cli\u003eDedicated I2C pads to connect extra peripherals (like an external compass)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSupports Betaflight and Cleanflight.\u003c\/li\u003e\r\n\u003cli\u003eBetaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\u003c\/li\u003e\r\n\u003cli\u003eSoft-mounting built in. The IMU (\"gyro\") chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\u003c\/li\u003e\r\n\u003cli\u003eNew high-performance \/ low-noise \/ high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz.\u003c\/li\u003e\r\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\r\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\r\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\r\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on \"BAT\" pad only).\u003c\/li\u003e\r\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 AIO monitors voltage directly from the battery power lead.\u003c\/li\u003e\r\n\u003cli\u003eFiltered voltage output for clean, noise-free video. On-board regulators output 5v at up to 1.5 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\u003c\/li\u003e\r\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMCU: STM32F405RGT6 32-bit processor\u003c\/li\u003e\r\n\u003cli\u003eIMU: ICM20689 (SPI)\u003c\/li\u003e\r\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\r\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\r\n\u003cli\u003e5 hardware UARTS (UART1,3,4, 5, 6)\u003c\/li\u003e\r\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\r\n\u003cli\u003e128 Mbit Dataflash chip for Blackbox logging\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 35x30x8mm (includes USB in height)\u003c\/li\u003e\r\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/li\u003e\r\n\u003cli\u003eWeight: 7g\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cstrong\u003eAtlatl HV V2\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCompatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.\u003c\/li\u003e\r\n\u003cli\u003eSupports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.\u003c\/li\u003e\r\n\u003cli\u003eSmartAudio input allows remote control by the flight controller (where supported). Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.\u003c\/li\u003e\r\n\u003cli\u003eAll parameters art controllable via push-button on the side of the unit, for case where SmartAudio is not used. \u003c\/li\u003e\r\n\u003cli\u003eLED Indicators of Channel, Band and Power. Allow easily check VTX Parameters by glancing at the quad.\u003c\/li\u003e\r\n\u003cli\u003eVariable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.\u003c\/li\u003e\r\n\u003cli\u003e0.5mW Ture Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in Microphone, so you can listen to your motors while you fly, no matter how far away you fly.\u003c\/li\u003e\r\n\u003cli\u003eStandard 36mm form factor allows you to mount the Atlatl directly in your flight controller stack.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOutput Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW\u003c\/li\u003e\r\n\u003cli\u003eAudio: 6.5 MHz Mono\u003c\/li\u003e\r\n\u003cli\u003eAntenna Connector: MMCX\u003c\/li\u003e\r\n\u003cli\u003eInput Voltage: 7 to 28 volts (2-6S LiPo) with absolute maximum 42 volts\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 35x25x7mm (Includes USB height)\u003c\/li\u003e\r\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/li\u003e\r\n\u003cli\u003eWeight: 9.3g\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eIncludes\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1x Tekko32 35A 4-in-1 ESC\u003c\/li\u003e\r\n\u003cli\u003e1x Kakute F4 V2 Flight Controller\u003c\/li\u003e\r\n\u003cli\u003e1x Atlatl HV V2 Video Transmitter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eResources\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro-Atlatl-HV-v2-Manual.pdf\"\u003ehttp:\/\/www.holybro.com\/manual\/HolybroAtlatlManualv2.pdf\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/KakuteF4V2Manual.pdf\"\u003ehttp:\/\/www.holybro.com\/manual\/KakuteF4V2Manual.pdf\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":14778864664639,"sku":"8914","price":112.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/a80566a196_1.jpg?v=1570043987","url":"https:\/\/dronecosmo.myshopify.com\/products\/holybro-kakute-v2-atlatl-hv-v2-tekko32-35a-4-in-1-esc-combo","provider":"DroneCosmo","version":"1.0","type":"link"}