{"product_id":"holybro-kakute-f4-aio-v2-atlatl-hv-v2-stack","title":"Holybro Kakute F4 AIO V2 - Atlatl HV V2 Stack","description":"\u003cp\u003eHolybro is saving you time and guesswork into making your perfect FPV stack. Comes with the Kakute AIO V2 FC and the seriously reworked Atlatl HV V2 VTX. The V2 features a new dedicated button, outward facing MMCX connector, and LED indicators for channel, band, and power. This stack is as solid as they come!\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003eKakute F4 All-In-One V2\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cstrong\u003eNew V2 Features\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAdditional UART (UART 4) added to support serial camera communication such as to RunCam Split. Please note this is NOT the same as Betaflight Camera Control feature, which controls the menu of FPV cameras like Swift, etc.\u003c\/li\u003e\r\n\u003cli\u003eAdditional UART (UART 5) added to support ESC telemetry such as from BLHeli_32 and KISS.\u003c\/li\u003e\r\n\u003cli\u003eThrough-hole solder pads instead of flat pads for more secure soldering especially for beginners.\u003c\/li\u003e\r\n\u003cli\u003eBarometer sensor on board allows altitude hold mode.\u003c\/li\u003e\r\n\u003cli\u003eI2C pad available for certain external sensors.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSupports Betaflight and Cleanflight.\u003c\/li\u003e\r\n\u003cli\u003eBetaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\u003c\/li\u003e\r\n\u003cli\u003eSoft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\u003c\/li\u003e\r\n\u003cli\u003eNew high-performance \/ low-noise \/ high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz.\u003c\/li\u003e\r\n\u003cli\u003e2 oz. copper PCB allows up to 120A maximum continuous current.\u003c\/li\u003e\r\n\u003cli\u003eDedicated bootloader button for easy firmware flashing.\u003c\/li\u003e\r\n\u003cli\u003eLow-profile design fits into even very compact frames.\u003c\/li\u003e\r\n\u003cli\u003eInput voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).\u003c\/li\u003e\r\n\u003cli\u003eAutomatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 AIO monitors voltage directly from the battery power lead.\u003c\/li\u003e\r\n\u003cli\u003eFiltered voltage output for clean, noise-free video. On-board regulators output 5v at up to 1.5 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\u003c\/li\u003e\r\n\u003cli\u003eSupports BLHeli pass-through for easy ESC upgrade and configuration.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMCU: STM32F405RGT6 32-bit processor\u003c\/li\u003e\r\n\u003cli\u003eIMU: ICM20689 (SPI)\u003c\/li\u003e\r\n\u003cli\u003eBarometer: BMP280\u003c\/li\u003e\r\n\u003cli\u003eUSB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\u003c\/li\u003e\r\n\u003cli\u003e5 hardware UARTS (UART1,3,4, 5, 6)\u003c\/li\u003e\r\n\u003cli\u003eSupports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.\u003c\/li\u003e\r\n\u003cli\u003e128 Mbit Dataflash chip for Blackbox logging\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 35x43x7mm (includes USB in height)\u003c\/li\u003e\r\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\r\n\u003cli\u003eWeight: 7g\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cstrong\u003eAtlatl HV V2\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCompatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.\u003c\/li\u003e\r\n\u003cli\u003eSupports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.\u003c\/li\u003e\r\n\u003cli\u003eSmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.\u003c\/li\u003e\r\n\u003cli\u003eAll parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.\u003c\/li\u003e\r\n\u003cli\u003eMMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.\u003c\/li\u003e\r\n\u003cli\u003eLED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.\u003c\/li\u003e\r\n\u003cli\u003eVariable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.\u003c\/li\u003e\r\n\u003cli\u003e0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.\u003c\/li\u003e\r\n\u003cli\u003eBuilt in microphone, so you can listen to your motors while you fly, no matter how far away you fly.\u003c\/li\u003e\r\n\u003cli\u003eStandard 36mm form factor allows you to mount the Atlatl directly on your flight controller stack.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOutput Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW\u003c\/li\u003e\r\n\u003cli\u003eAudio: 6.5 MHz Mono\u003c\/li\u003e\r\n\u003cli\u003eAntenna Connector: MMCX\u003c\/li\u003e\r\n\u003cli\u003eInput Voltage: 7 to 28 volts (2-6S LiPo) with absolute maximum 42 volts\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 35x25x7mm (Includes USB height)\u003c\/li\u003e\r\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes \u003c\/li\u003e\r\n\u003cli\u003eWeight: 9.3g\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eIncludes\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1x Kakute F4 AIO V2 FC\u003c\/li\u003e\r\n\u003cli\u003e1x Atlatl HV V2 VTX\u003c\/li\u003e\r\n\u003cli\u003e1x 80mm SMA--MMCX Cable \u003c\/li\u003e\r\n\u003cli\u003e1x 150mm 4pin JST GH wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eManual\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro-Atlatl-HV-v2-Manual.pdf\"\u003eHolybro Atlatl HV V2 Manual\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/Holybro_Kakute_F4_AIO_V2_Manual.pdf\"\u003eHolybro_Kakute_F4_AIO_V2_Manual\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":14778863222847,"sku":"8883","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/329d156b01.jpg?v=1570043987","url":"https:\/\/dronecosmo.myshopify.com\/products\/holybro-kakute-f4-aio-v2-atlatl-hv-v2-stack","provider":"DroneCosmo","version":"1.0","type":"link"}