{"product_id":"holybro-atlatl-hv-5-8ghz-video-transmitter","title":"Holybro Atlatl HV 5.8GHz Video Transmitter","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eSince the late September, the pit mode outputs on both Atlatl HV and Kopis 1 have been changed into 0.5mw.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eCompatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.\u003c\/p\u003e\r\n\u003cp\u003eSupports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.\u003c\/p\u003e\r\n\u003cp\u003eTelemetry input allows remote control by the flight controller (where supported). Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis, and more.\u003c\/p\u003e\r\n\u003cp\u003eVariable transmit power from 25 mW to 600 mW. Use 25 mW for a race and then easily switch to 600 mW for freestyle.\u003c\/p\u003e\r\n\u003cp\u003ePit Mode allows you to power up safely without the risk of knocking other pilots out of the air.\u003c\/p\u003e\r\n\u003cp\u003eMono audio input allows you to install a microphone, so you can listen to your motors while you fly, no matter how far away you fly.\u003c\/p\u003e\r\n\u003cp\u003eStandard 36mm form factor allows you to mount the Atlatl directly in your flight controller stack.\u003c\/p\u003e\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCompatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.\u003c\/li\u003e\r\n\u003cli\u003eSupports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.\u003c\/li\u003e\r\n\u003cli\u003eTelemetry input allows remote control by the flight controller (where supported). Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis, and more.\u003c\/li\u003e\r\n\u003cli\u003eVariable transmit power from 25 mW to 600 mW. Use 25 mW for a race and then easily switch to 600 mW for freestyle.\u003c\/li\u003e\r\n\u003cli\u003ePit Mode allows you to power up safely without the risk of knocking other pilots out of the air.\u003c\/li\u003e\r\n\u003cli\u003eMono audio input allows you to install a microphone, so you can listen to your motors while you fly, no matter how far away you fly.\u003c\/li\u003e\r\n\u003cli\u003eStandard 36mm form factor allows you to mount the Atlatl directly in your flight controller stack.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eHow to change the power and Channel?\u003cbr\u003eIf you are using it with a Betaflight Flight Controller built-in Betaflight OSD, you can manage the Atlatl's transmit power and Channel from within OSD.\u003cbr\u003eMore details about operation steps, pls read the manual.\u003c\/p\u003e\r\n\u003cp\u003eChannel-Change Button: \u003cbr\u003eThe Atlatl is intended to be configured via Telemetry. If you can not use Telemetry, you can change Channels by using the Button built-on the surface of VTX. \u003cbr\u003eThe button is intended only as a fallback option for when Telemetry is not available. It would be very tedious to use the button as the primary means of configuring the Atlatl.\u003cbr\u003e \u003cbr\u003e1. Hold the button down for 2 Seconds to switch from Telemetry Mode to Button Mode.\u003cbr\u003e2.Then Press the button one time to change to the next channel. There is no separate \" Band\" and \" Channel\" function. The Atlatl will simply step through all 40 Channels that it supports.\u003c\/p\u003e\r\n\u003cp\u003ePit Mode: (0.5mW)\u003cbr\u003e1. You can use the Betaflight OSD. In the VTX control section of the OSD ( Look at manual). There is an option, \" Pit\", which can be on or off. Manually change this option to put it into and take it out of, pit mode.\u003cbr\u003e2. Or you also can hold down the Atlatl's button while you plug in the battery. This will make Atlatl to power up in Pit Mode. Just be remember to take it out of pit mode before flying, if not, you will lose sign.\u003c\/p\u003e\r\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOutput Power: 0.5 mW (pit mode), 25 mW, 100 mW, 200 mW, 400 mW, 600 mW\u003c\/li\u003e\r\n\u003cli\u003eAudio: 6 MHz + 6.5 MHz Mono\u003c\/li\u003e\r\n\u003cli\u003eAntenna Connector: MMCX\u003c\/li\u003e\r\n\u003cli\u003eInput Voltage: 7 to 42 volts (2-6S LiPo)\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 35x35x7mm\u003c\/li\u003e\r\n\u003cli\u003eMounting Holes: Standard 30.5mm square to center of holes\u003c\/li\u003e\r\n\u003cli\u003eWeight: 10.8g\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003c\/p\u003e\r\n\u003ch2\u003eIncludes\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eVTx Board *1 \u003c\/li\u003e\r\n\u003cli\u003eHeat sink *1 \u003c\/li\u003e\r\n\u003cli\u003e80mm SMA--MMCX Cable *1 \u003c\/li\u003e\r\n\u003cli\u003e150mm 4pin JST GH wire *1\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003eResources\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"http:\/\/www.holybro.com\/manual\/HolybroAtlatlManualv10.pdf\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":14778860830783,"sku":"8313","price":31.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/8301\/2671\/products\/b8047854-e44a-493e-bbbd-ee746fd9e2d8.jpg?v=1570043987","url":"https:\/\/dronecosmo.myshopify.com\/products\/holybro-atlatl-hv-5-8ghz-video-transmitter","provider":"DroneCosmo","version":"1.0","type":"link"}